Fuel Injector Seals Tools Replace EN-49245 EN-51105 18683AA000 For GM245

Fuel Injector Seals Tools Replace EN-49245 EN-51105 18683AA000 For GM245

Product description:

Type: Fuel Injector Seal Tool

Part Number: For EN-49245, EN-51105 GM245

Interchange Part Number: FOR #EN-49245,#EN-51105, #18683AA000

Fuel Type: Diesel

Items Included: One Set of Seal Tool Kit

Product Functions: Install the seal on the injector for leak-free op

Fitment:

Fits for General Motors 2.0L & 3.6L engines with Hitachi fuel injectors [2010-2017] and 2.0L, 2.5L, 5.3L & 6.2L engines , Continental Delphi fuel injectors [2012-2017] and compatible with Subaru [2014-2019] 2.0L/2.4L turbo engines

Fits for GM 2.0L & 3.6L engines with Hitachi Fuel Injectors (2010 - 2017)

Fits for GM 2.0L, 2.5L, 5.3L & 6.2L engines ,Continental and Delphi Fuel injectors (2012 - 2017)

Fits for Holden Colorado 7 (2016)

Fits for Subaru 2.0L & 2.4L turbo engines (2014 - 2019)

Features:

(1) Comparable to for #EN-49245, #EN-51105 and #18683AA000.

(2) Kit contains 4 install tools to properly size the seal and install the seal in the proper groove on the injector tip for leak-free operation. Works to install both seals on the injector tip. Install seals faster and easier. Similar to EN-51105.

(3) This tool set helps replace the fuel injector teflon seal for leak-free operation.

NOTE:

These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are installed into their bores in the cylinder head.

There are two seal installation pilots included in this kit (one for each groove) which allow the seal to slide onto the injector tip without catching on any machined surface, or the incorrect groove.

This kit also includes a seal installer to drive the seal over the pilot and into the groove, and a sizer to compress each seal into its groove and ensure its size prior to installation.

This kit must be used to install the seals correctly and to ensure they are sized correctly for leak-free operation.

Please check the part number and compare with pictures provided here before purchasing to ensure proper fitment.

Instructions:

1.Cut off the teflon seal near the tip ofthe injector.

2.Place the pilot cone on the tip of the injector then put the seal on the cone.

3.Use the installer to push the seal intothe groove of the injector.

4.Use the sizer tool to compress the teflon seal to the correct size.

5.Done! The seal is installed correctly and to sized correctly for leak-free operation.

Package included:

1 x EN-49245-1 Long Seal Installer Guide Alt.

1 x EN-49245-2 Short Seal Installer Guide Alt.

1 x EN-49245-3 & EN-49245-4 Seal Sizer & Installer Pusher Alt.

1 x EN-51105-1 fits for 2013-Newer , Continental, Delphi SIDI Injector Seal Installer Adapter Alt.

1 x EN-51105-2 fits for 2013-Newer , Continental, Delphi SIDI Injector Seal Installer Adapter Alt.