Carbon Brush Holder Motor Brushes Parts Power Tools Accessories

Product Description:

Made of material, This section supersedes obsolete sections 14-46-2012 22-22-1640. Brushes that are constantly worn out are the cause of poor motor. A motor that runs intermittently can be repaired by replacing the brushes. New brushes can restore electric braking to the motor. Carbon brushes are of the most frequently replaced power tool parts. This is because carbon brushes are consumable parts that gradually wear out through friction use until they need to be replaced. Worn brushes are a common cause of intermittent motor function, weakened electric braking, reduced motor power. Worn brushes usually wear close to the wires may crack, dent, or burn. When replacing carbon brushes, be sure to inspect your for burns, cracks, or other damage that could indicate a larger motor problem. This assembly holds the carbon brushes around the to provide a stable . This kit includes: plastic retaining ring, four(4) metal brush holders with springs, four(4) carbon brushes with attached wires.

Compatible with these models: for 2601-20(B28B) 1/ for 2" Compact Driver Drill 2601-20(B28C) 1/ for 2" Compact Driver Drill 2650-20(B55B) 18 Volt 1/4" Hex Driver 2651-20(B77B) 18 Volt 3/8" Square Driver 2652-20(B78B) 18 Volt 1/ for 2" Square Driver 2602-20(SER C15A) 1/ for 2" Compact Drill ac2601-059(SER D36A) 1/ for 2" Compact Driver Drill 2601-059(SER D36C) 1/ for 2" Compact Driver Drill 2602-20(C15B) 1/ for 2" Compact Drill 2650-20(B55C) 18 Volt 1/4" Hex Driver 2602-20(SER C15D) 1/ for 2" Compact Drill 2601-21 1/ for 2" Compact Driver Drill

To replace this component, you will need a screwdriver: 1 First remove the screws holding the cover together

for 2 Carefully separate the housing to gain for access to the brush holder 3 Disconnect the wires 4 Remove the screws securing the card swiping assembly 5 Remove the old brush holder install the new assembly

Reassemble and test your tool

Package Included: 1* carbon brush holder

Note: 1.The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.

for 2.Please allow slight manual measurement deviation for the data.